Search found 443 matches
- Sun Jul 31, 2022 11:15 am
- Forum: TABC Chat
- Topic: TC Steering
- Replies: 26
- Views: 3834
Re: TC Steering
Look in any MG manual that lists specifications for TA, TB, and TC. The prewar cars were set at 1/2".
- Sun Jul 31, 2022 2:01 am
- Forum: TABC Chat
- Topic: TC Steering
- Replies: 26
- Views: 3834
Re: TC Steering
You know you can shim the box without the Tompkins kit. Have you set the steering up with the peg at the high point on the worm with the wheels centered? The peg can easily be replaced or rotated if worn on two sides. Set the toe in to 1/2" like the prewar cars instead of 3/8" it is transformative. ...
- Fri Jul 29, 2022 2:24 am
- Forum: TABC Chat
- Topic: Low Oil Pressure
- Replies: 7
- Views: 1048
Re: Low Oil Pressure
Just to note that people like to blame the oil pumps for low oil pressure on these engines. However, as Duncan states they are indeed quite robust. When I acquired TC2911 it had 19 lbs. of oil pressure at idle and running. After I rebuilt the engine, .010 under bearings etc. and new CAM bearings, et...
- Fri May 13, 2022 11:16 am
- Forum: TABC Chat
- Topic: tc carb needle
- Replies: 6
- Views: 792
Re: tc carb needle
To be more specific they were problematic in warm weather in stop and go traffic situations. Surging and generally poor running and idle. The standard needles worked much better.
- Tue May 10, 2022 2:25 am
- Forum: TABC Chat
- Topic: tc carb needle
- Replies: 6
- Views: 792
Re: tc needles
I tried lean needles in my TC for awhile and they did not run very well, went back to standard.
- Sun Apr 24, 2022 3:07 am
- Forum: TABC Chat
- Topic: I can remove the pump aceite without remove or move from place the engine?
- Replies: 12
- Views: 1303
Re: I can remove the pump aceite without remove or move from place the engine?
Why do you think your problem lies with the oil pump? Typically, low oil pressure is a result of worn bearings, cam, rod, mains, some or all.
- Thu Apr 21, 2022 8:04 am
- Forum: TABC Chat
- Topic: Alternative Wheels For A TC
- Replies: 8
- Views: 668
Re: Alternative Wheels For A TC
Ok, I'm staying with the 19's and will be happy with them. Thanks for your input. Thanks goodness. You know aesthetically, a TC is about perfect, there is not a bad line anywhere, YOU can't make it better no matter what you think looks good!. However it is a package deal, it all works together as i...
- Sun Apr 10, 2022 2:55 am
- Forum: TABC Chat
- Topic: Rear engine oil seal leak
- Replies: 12
- Views: 1129
Re: Rear engine oil seal leak
Excellent Mark, hopefully you have found an easy fix and can move on, looks great.
- Sat Apr 09, 2022 1:21 pm
- Forum: TABC Chat
- Topic: Rear engine oil seal leak
- Replies: 12
- Views: 1129
Re: Rear engine oil seal leak
I feel your pain so I built a test stand to run the engine on prior to putting it back in the car and ran it for a good long time.
- Sat Apr 09, 2022 9:57 am
- Forum: TABC Chat
- Topic: Rear engine oil seal leak
- Replies: 12
- Views: 1129
Re: Rear engine oil seal leak
Mark, you do have to remove the sump, flywheel etc. to get access to the rear of the engine. The rear main cap will be removed, but the crank really does not have to come out. You are basically setting this up so the alloy slinger is very lightly against the crank indicated by the transfer of engine...
- Sat Apr 09, 2022 2:54 am
- Forum: TABC Chat
- Topic: Rear engine oil seal leak
- Replies: 12
- Views: 1129
Re: Rear engine oil seal leak
Just for some information, when I rebuilt the engine of TC2911 which leaked a pie plate of oil on shutdown, I used the Moss seal. These things require very exacting installation to work and really need the speedy sleeve installed which I did not do and my installation was not successful. I think the...
- Thu Apr 07, 2022 1:21 am
- Forum: TABC Chat
- Topic: TC Body Assemble Sequence?
- Replies: 16
- Views: 1441
Re: TC Body Assemble Sequence?
Norman is correct. I also found that it was best with the running gear in the chassis and the car sitting on four wheels as it normally would.
Re: Car hood
I could be wrong, but I believe I was told that Moss tops, curtains, etc. were made by Robbins which is an excellent quality top manufacturer here. I put these products on my TC years ago and was generally pleased with them. A friend of mine was a Moss dealer in those days so there was a financial b...
Re: TC Video
Very enjoyable, thanks for posting. So what is the status of the car now?
Back on the road again?
Back on the road again?
- Thu Nov 25, 2021 3:06 am
- Forum: TABC Chat
- Topic: Fiberglass removal
- Replies: 3
- Views: 467
Re: Fiberglass removal
Heat gun was a good idea too!
I don't notch fender welting on my cars, just run the screws through it. There really is no reason to risk damage and it is held tightly in place with a screw hole.
I don't notch fender welting on my cars, just run the screws through it. There really is no reason to risk damage and it is held tightly in place with a screw hole.
- Tue Nov 16, 2021 4:06 pm
- Forum: TABC Chat
- Topic: MGTC gearbox
- Replies: 3
- Views: 546
Re: MGTC gearbox
The TC box is much sturdier. If you have had both a TC and TD box apart there is no comparison to the strength of the TC internals.
- Mon Nov 15, 2021 11:15 am
- Forum: TABC Chat
- Topic: 8 inch Headlights
- Replies: 86
- Views: 9071
Re: 8 inch Headlights
Is that stated as being specifically for a TC? Reflectors are available for early Fords and probably street rods but they likely will not fit inside a TC lamp housing nor will they be oriented correctly for the low and high beams to work properly.
- Mon Nov 15, 2021 4:18 am
- Forum: TABC Chat
- Topic: Fiberglass removal
- Replies: 3
- Views: 467
Re: Fiberglass removal
Assuming the fumes are long gone, a propane torch with low heat will will easily get it warm enough to come off.
- Sun Nov 14, 2021 12:56 pm
- Forum: TABC Chat
- Topic: 8 inch Headlights
- Replies: 86
- Views: 9071
Re: 8 inch Headlights
From the Frame Up has some of the parts also. The reflectors do come up on eBay from time to time as that is where I found mine. They all need replating.
- Sun Nov 14, 2021 3:21 am
- Forum: TABC Chat
- Topic: 8 inch Headlights
- Replies: 86
- Views: 9071
Re: 8 inch Headlights
Look at my post of Nov. 7th. and also the exploded view in the on line Moss catalog. My post shows the bulb holder pushed through the reflector, bulb, rubber seal. The Moss view shows the various clips and retainers.