First post on the new forum

Discussion of TABC-related matters
Post Reply
User avatar
Steve Simmons
Site Admin
Posts: 2635
Joined: Wed Dec 26, 2012 10:48 am
Location: Southern California
Contact:

First post on the new forum

Post by Steve Simmons » Wed Dec 26, 2012 10:48 am

This is the first post.

(Any posts appearing before this one were transferred from the old Yahoo email list)
1949 TC8975 / XPAG 9609
1948 TC6011 / XPEG1182 (XPAG6472)
http://www.mgnuts.com

User avatar
David Edgar
Posts: 37
Joined: Sun Dec 30, 2012 8:44 pm
Location: El Cajon, California

Re: First post on the new forum.

Post by David Edgar » Mon Dec 31, 2012 12:00 am

A test reply from someone else.

And to keep this TABC related I still need to seal my leaking differential. Other than that it seems to work pretty decent (for a TC anyway). :lol:

Just tried adding a smile and font styles to see what happens
Last edited by David Edgar on Wed Jan 02, 2013 3:06 pm, edited 2 times in total.
David Edgar, 1948 TC 5108 / XPAG 5801
Owned since November 1967

User avatar
Jim Shade
Posts: 62
Joined: Sun Dec 30, 2012 9:29 pm
Location: West Covina California USA
Contact:

Re: First post on the new forum.

Post by Jim Shade » Mon Dec 31, 2012 9:49 am

and another test reply from someone else
Jim Shade
West Covina CA, USA
(626) 332-2938

User avatar
Steve Simmons
Site Admin
Posts: 2635
Joined: Wed Dec 26, 2012 10:48 am
Location: Southern California
Contact:

Re: First post on the new forum.

Post by Steve Simmons » Mon Dec 31, 2012 11:55 am

And how about another reply with an image. Seems like things are working well enough...
Attachments
MG T-ABC's Forever Logo
MG T-ABC's Forever Logo
TABCs_forever.gif (21.55 KiB) Viewed 5431 times
1949 TC8975 / XPAG 9609
1948 TC6011 / XPEG1182 (XPAG6472)
http://www.mgnuts.com

User avatar
Jim Shade
Posts: 62
Joined: Sun Dec 30, 2012 9:29 pm
Location: West Covina California USA
Contact:

Re: First post on the new forum.

Post by Jim Shade » Mon Dec 31, 2012 12:37 pm

and that is a nice feature
Attachments
jim%20in%20tc[2].jpg
jim%20in%20tc[2].jpg (62.03 KiB) Viewed 5428 times
Jim Shade
West Covina CA, USA
(626) 332-2938

User avatar
olson_gene
Posts: 30
Joined: Wed Jan 02, 2013 8:29 pm
Location: Simi Valley

Re: First post on the new forum.

Post by olson_gene » Wed Jan 02, 2013 9:12 pm

fdshade wrote:and that is a nice feature
quote feature is also nice ! :bow:

edit seems to work :thumbs:
Gene Olson
Simi Valley
Southern California

User avatar
Steve Simmons
Site Admin
Posts: 2635
Joined: Wed Dec 26, 2012 10:48 am
Location: Southern California
Contact:

Re: First post on the new forum.

Post by Steve Simmons » Thu Jan 03, 2013 9:09 am

Here is an image attachment with the new automatic re-size feature. Note the different behavior between this one and Jim's attachment above. Large images now fit inside the message area correctly rather than spilling out. Clicking the image brings up the full size version. If an attachment is 640 pixels wide or smaller, then obviously you can't click for a larger version.

Attachments are currently limited to 1600 pixels wide and high, and 1mb in file size. When automatically re-sized, the smaller version is 640 pixels wide, and should be less than 100kb which will make page loads much faster for users. When clicked, the full size image uploaded by the user is displayed unaltered.
Attachments
Two lovely ladies in a lovely TC.
Two lovely ladies in a lovely TC.
1949 TC8975 / XPAG 9609
1948 TC6011 / XPEG1182 (XPAG6472)
http://www.mgnuts.com

Post Reply