Page 1 of 1
MG TA Hood fitting
Posted: Sun Apr 28, 2019 1:51 am
by martinjames
I am about to tackle fitting a new hood supplied by Don Trimming.
They supplied small black nails to tack the hood to the rear wooden rail.
Has anyone used another method to attach the hood to the rear of the car?
Martin
Re: MG TA Hood fitting
Posted: Sun Apr 28, 2019 4:00 am
by cdrolshagen
Hi Martin,
yes, I used push on buttons, the advatage is, you can open the rear of the hood, when errected, to put luggage in
cheers Carl
Re: MG TA Hood fitting
Posted: Wed May 01, 2019 6:59 am
by Mitchman2
Wash your hands often if it's cloth.
Re: MG TA Hood fitting
Posted: Sat May 04, 2019 11:40 am
by bloodysalmon
I like that idea Carl, good plan
Re: MG TA Hood fitting
Posted: Sat May 04, 2019 11:43 pm
by martinjames
Thanks Guys. Doug Pelton (FTFU) also suggested the push buttons.
Re: MG TA Hood fitting
Posted: Sat May 04, 2019 11:44 pm
by martinjames
Sorry, not the push buttons. Doug recommended brass screws with cup washers.