wheel cylinder TA

Discussion of TABC-related matters
Post Reply
User avatar
Rod Letcher
Posts: 15
Joined: Fri May 24, 2019 12:49 pm
Location: Eugene, Oregon USA
Contact:

wheel cylinder TA

Post by Rod Letcher » Sun Oct 13, 2019 9:04 am

What issues might I encounter if I try to use a 'Moss Motors" wheel cylinder meant for a TC on my TA?

Rod
Rod
http://www.customfurniture.net/
1913 Ford Model T Speedster
1931 Ford Model A Deluxe Roadster
1938 MG TA
1952 Jaguar XK120 FHC
1957 Ford Thunderbird
1992 Chevy Silverado stepside PU (bought new)

frenchblatter
Posts: 367
Joined: Wed Apr 01, 2015 1:22 pm
Location: Royston, South Yorkshire
Contact:

Re: wheel cylinder TA

Post by frenchblatter » Sun Oct 13, 2019 2:07 pm

Slightly different part number on the NTG web site so I'm not sure.

If you're in the UK ring NTG 01473 406031 and ask Linda (or MIke).

Ed to add that I've just noticed where you are. Ring Doug Pelton at From the Frame UP
Lynne & Norman Verona.

Our website

Visit our website to see what this idiot gets up to in his retirement

User avatar
Rod Letcher
Posts: 15
Joined: Fri May 24, 2019 12:49 pm
Location: Eugene, Oregon USA
Contact:

Re: wheel cylinder TA

Post by Rod Letcher » Mon Oct 14, 2019 2:32 pm

Thanks for the response, I think I will send both front cylinders to "White Post Restorations' and not have to deal with cobbing some fittings/hoses together to make the "c" cylinders work. Anybody have any experience with "White post"

Rod
Rod
http://www.customfurniture.net/
1913 Ford Model T Speedster
1931 Ford Model A Deluxe Roadster
1938 MG TA
1952 Jaguar XK120 FHC
1957 Ford Thunderbird
1992 Chevy Silverado stepside PU (bought new)

User avatar
Steve Simmons
Site Admin
Posts: 878
Joined: Wed Dec 26, 2012 10:48 am
Location: Southern California
Contact:

Re: wheel cylinder TA

Post by Steve Simmons » Mon Oct 14, 2019 4:49 pm

I've heard both good and bad reports about them. A wheel cylinder is such a simple item that I can't imagine anyone would have a problem sleeving it. Even a corner machine shop should be able to handle the job.
1949 TC8975 / XPAG 9609
1949 TC9849 EXU / XPAG 10507
http://www.mgnuts.com

Tom Lange, MGT Repair
Posts: 169
Joined: Mon Jan 07, 2013 10:14 am

Re: wheel cylinder TA

Post by Tom Lange, MGT Repair » Mon Oct 14, 2019 6:01 pm

I would use Mark Frappier of Agawam, Massachusetts over anyone else. He does all my sleeving, and is EXCELLENT!

Tom Lange
MGT Repair

Post Reply