TC Bumpers

Discussion of TABC-related matters
Post Reply
User avatar
jddevel
Posts: 533
Joined: Wed Jun 20, 2018 11:48 pm
Location: cornwall uk

TC Bumpers

Post by jddevel » Fri Jun 12, 2020 5:44 am

My imported from the US `48 TC that I`m about to start restoring has bumpers. I assume this was a USA requirement or was it after market. Second question would you leave off or refit (They do need rechroming so that may well be the deciding factor anyway due to cost.

Tom Lange, MGT Repair
Posts: 305
Joined: Mon Jan 07, 2013 10:14 am

Re: TC Bumpers

Post by Tom Lange, MGT Repair » Fri Jun 12, 2020 6:10 am

First, do you have an EXU? That was the variant for import to the US, with special features like bumpers and turn signals. (The Guarantee Plate will be stamped "EXU" if it is.) I don't believe the EXU features were required by US law, but were thought of as features closer to the current US car.

If not, they are aftermarket and it is completely up to you whether to use them or not - I find them a bit ungainly. Perhaps it depends on how much you will driving the car, and in what sort of environment. If in town frequently, then they might be useful. They do offer some degree of protection, but anyone knowledgeable looking at the car will first-of-all say, "Well, the bumpers aren't original..." In American a popular aftermarket item was what we called "nerf-bars," vertical rods that stuck out fore and aft to help protect from a touch from another car.

Tom Lange
MGT Repair

User avatar
Steve Simmons
Site Admin
Posts: 2635
Joined: Wed Dec 26, 2012 10:48 am
Location: Southern California
Contact:

Re: TC Bumpers

Post by Steve Simmons » Fri Jun 12, 2020 6:42 am

Inskip and a couple others sold add-on bumpers which were very popular for a time in the 50s. You still see them now and then. My personal preference is to go without them. If yours are actual EXU bumpers then they will bring a handsome price should you decide to sell.
1949 TC8975 / XPAG 9609
1948 TC6011 / XPEG1182 (XPAG6472)
http://www.mgnuts.com

User avatar
jddevel
Posts: 533
Joined: Wed Jun 20, 2018 11:48 pm
Location: cornwall uk

Re: TC Bumpers

Post by jddevel » Fri Jun 12, 2020 8:03 am

Thanks Tom and Steve. I`ll have to check tomorrow. I don`t think I`ll be bothering fitting them as the chrome has all but disappeared and other than painting them the cost of replating for a car being used in the UK/Europe is pointless in my opinion. Regarding their value.That I would have thought would really only apply to the US market and there, shipping would be prohibitive surely.

User avatar
jddevel
Posts: 533
Joined: Wed Jun 20, 2018 11:48 pm
Location: cornwall uk

Re: TC Bumpers

Post by jddevel » Fri Jun 12, 2020 8:10 am

Tom, I note that a car listed by Harwoods https://www.ebay.com/itm/1946-MG-T-Seri ... tion=2%7C0 although displaying bumpers makes no reference to EXU on its guarantee plate. Is this likely then to be an aftermarket imported from the UK or would the ECU be indicated elsewhere?

bloodysalmon
Posts: 230
Joined: Mon Jan 22, 2018 4:10 am
Location: Nottinghamshire, UK

Re: TC Bumpers

Post by bloodysalmon » Fri Jun 12, 2020 8:20 am

I repatriated 2 TC's, both had these 'cow-horn' upright chromed 'things' on ... went to the metal scrap dealers.

Saying that they did have a purpose I suppose to stop your car being nudged in the supermarket carpark.
Attachments
TC1472 120x90 pixel - Copy.JPG
TC1472 120x90 pixel - Copy.JPG (4.27 KiB) Viewed 2374 times
Chris Blood - TC2686& TC3615

User avatar
Steve Simmons
Site Admin
Posts: 2635
Joined: Wed Dec 26, 2012 10:48 am
Location: Southern California
Contact:

Re: TC Bumpers

Post by Steve Simmons » Fri Jun 12, 2020 8:23 am

The eBay TC is a home market car with aftermarket bumpers. EXU models were only produced in 1948-49. While I dislike the look of bumpers on TCs, The EXU bumpers were much nicer looking than any of the aftermarket parts I've seen.
1949 TC8975 / XPAG 9609
1948 TC6011 / XPEG1182 (XPAG6472)
http://www.mgnuts.com

User avatar
Franz
Posts: 28
Joined: Sun May 27, 2018 12:06 am
Location: Vienna Austria

Re: TC Bumpers

Post by Franz » Fri Jun 12, 2020 11:33 pm

For me the TC is more beautiful without bumpers, also think they won’t help by a accident.

I have also a Mercedes SL model R107, they must have for America special pumpers, you cannot imagine how ugly the car looks with them.

Hello from the sunny Vienna

Franz

Tom Lange, MGT Repair
Posts: 305
Joined: Mon Jan 07, 2013 10:14 am

Re: TC Bumpers

Post by Tom Lange, MGT Repair » Sat Jun 13, 2020 6:35 am

The original EXU bumpers were curved in profile from top to bottom, really smaller versions of the TD bumpers. Whenever you see the flat-bar bumpers, they are aftermarket.

I knew one TC owner who added aftermarket bumpers because he claimed his wife, who drove the car, "can't drive worth a damn, and can't stop worth a damn." The car looked and ran fine, so I suspect he was just being cautious.
Tom Lange
MGT Repair

User avatar
Franz
Posts: 28
Joined: Sun May 27, 2018 12:06 am
Location: Vienna Austria

Re: TC Bumpers

Post by Franz » Sat Jun 13, 2020 9:04 am

Found this pictures from a TC with bumpers in the book factory original T Series.
Looks nice, but similar to a TD

Franz
Attachments
D37FA74E-EDED-4BDC-9A66-970F32F797A5.jpeg
D37FA74E-EDED-4BDC-9A66-970F32F797A5.jpeg (115.74 KiB) Viewed 2299 times

User avatar
Duncan M
Posts: 777
Joined: Fri Oct 10, 2014 9:08 pm
Location: Northern California

Re: TC Bumpers

Post by Duncan M » Sat Jun 13, 2020 6:33 pm

Interesting picture to pick for a book on originality. Showing chromed wire wheels, Alfins (or something shiney) chromed tail light bodies, that thing on the end of the tailpipe, and driving lights and a quick release radiator cap, and (unlit) license plate in back below the bumper. All incorrect on the exu. Does show the correct style exu 3 spoke steering wheel.

User avatar
jddevel
Posts: 533
Joined: Wed Jun 20, 2018 11:48 pm
Location: cornwall uk

Re: TC Bumpers

Post by jddevel » Sun Jun 14, 2020 6:13 am

Tom from your description mine are after market. The brackets to which the bumpers are fixed have been welded to the chassis frame. Will therefore have to cut them off to return to original.

User avatar
Duncan M
Posts: 777
Joined: Fri Oct 10, 2014 9:08 pm
Location: Northern California

Re: TC Bumpers

Post by Duncan M » Fri Jun 19, 2020 1:35 pm

Front EXU bumpers are entirely bolted on with no welding. Same with the rear. Fronts attach to chassis by way of a special damper mounting plate. see picture.
mount.jpg


Rears mounts are a bit more involved, and 2nd pic shows proper license plate bracket above bumper, with light above plate.
rear.JPG
rear.JPG (55.66 KiB) Viewed 2205 times
relate.jpg

User avatar
stephen stierman
Posts: 440
Joined: Mon Jan 07, 2013 6:12 pm
Location: worthington, ohio USA

Re: TC Bumpers

Post by stephen stierman » Sat Jun 20, 2020 2:12 am

TC2911 was a home market car, but when I purchased it was equipped with some sort of after market or perhaps even home made bumpers that were removed and disposed of in short order. I understand the appeal and rarity of the EXU and if I had one, the nice original chrome bumpers would remain. But I just have always felt that the TC was much more elegant looking with nothing to take away from the graceful sweep of the front and rear wings. Just thinking out loud!
Attachments
IMG_2557.JPG

User avatar
jddevel
Posts: 533
Joined: Wed Jun 20, 2018 11:48 pm
Location: cornwall uk

Re: TC Bumpers

Post by jddevel » Sun Jun 21, 2020 7:19 am

Duncan, Whilst I appreciate that the pictures you`ve added show a bolt on fitting in my case they certainly are welded. I assume that was the joice made by the person having the bumpers fitted. It`s been neatedly done.

Post Reply