TC floorboards

Discussion of TABC-related matters
Post Reply
antijam
Posts: 46
Joined: Mon May 19, 2014 1:54 pm
Location: Gloucestershire UK.

TC floorboards

Post by antijam » Mon Jun 11, 2018 10:30 am

The original floorboards of my TC have a steel angle section 1" x 1" x 13" long screwed on one flange to their rear extremity, the other flange being screwed to rear bulkhead where it meets the floor.
1-P1320042.JPG
I can find no reference to this part in any lists or manuals and I'm wondering if it was an original fitment or something added by a previous owner to reinforce the gap/joint between the floorboard and the bulkhead.

Can anyone confirm one way or the other? Thanks in anticipation

User avatar
Marv
Posts: 236
Joined: Sat Oct 03, 2015 7:34 pm

Re: TC floorboards

Post by Marv » Mon Jun 11, 2018 1:59 pm

My '48 did not have any steel angle strips on the floorboards>

Clifford Jay Lockrow
Posts: 22
Joined: Tue Jan 08, 2013 12:24 pm

Re: TC floorboards

Post by Clifford Jay Lockrow » Mon Jun 11, 2018 3:39 pm

All of the TCs I have worked on (many) all had the angle piece you are referring to. If the floorboards have been replaced thy could have been left off.

Tom Wilson
Posts: 50
Joined: Mon Jan 07, 2013 4:02 pm
Location: Zionsville, Indiana USA

Re: TC floorboards

Post by Tom Wilson » Tue Jun 12, 2018 4:15 am

It is original

antijam
Posts: 46
Joined: Mon May 19, 2014 1:54 pm
Location: Gloucestershire UK.

Re: TC floorboards

Post by antijam » Wed Jun 13, 2018 6:25 am

Thanks for the feedback guys - looks like I need a new angle. ;)

Post Reply