Dynamo oiler

Discussion of TABC-related matters
Post Reply
User avatar
jddevel
Posts: 533
Joined: Wed Jun 20, 2018 11:48 pm
Location: cornwall uk

Dynamo oiler

Post by jddevel » Sun Jan 20, 2019 5:48 am

With nothing wrong with the spring of brass fitting on my TF dynamo oiler I would like to change the felt as it appears to be past its sell by date. Normal sources only appear to sell the whole think which appears to be wasteful. What felt is used any advice please?

User avatar
Steve Simmons
Site Admin
Posts: 2635
Joined: Wed Dec 26, 2012 10:48 am
Location: Southern California
Contact:

Re: Dynamo oiler

Post by Steve Simmons » Sun Jan 20, 2019 9:16 am

1949 TC8975 / XPAG 9609
1948 TC6011 / XPEG1182 (XPAG6472)
http://www.mgnuts.com

User avatar
jddevel
Posts: 533
Joined: Wed Jun 20, 2018 11:48 pm
Location: cornwall uk

Re: Dynamo oiler

Post by jddevel » Mon Jan 21, 2019 12:37 am

Thank you

Eric Worpe
Posts: 69
Joined: Wed Jan 09, 2013 2:54 am
Location: GUILDFORD, Surrey, UK.

Re: Dynamo oiler

Post by Eric Worpe » Wed Jan 30, 2019 3:42 am

Next time you visit your dentist, scrounge some of the felt buffers that are sometimes placed between the teeth and gums. These are about an inch long by 3/8" dia. and provide an effective oil resevoir for the sintered bronze bush.

User avatar
jddevel
Posts: 533
Joined: Wed Jun 20, 2018 11:48 pm
Location: cornwall uk

Re: Dynamo oiler

Post by jddevel » Fri Feb 01, 2019 4:49 am

Great suggestion Eric. Thank you

Post Reply