Page 1 of 1
Aluminum Instrument Panel?
Posted: Thu Jan 31, 2019 9:55 pm
by TBrad
Anybody ever come across an aluminum/aluminium reproduction instrument panel on a TC? Just the center section, not the entire facia.
Re: Aluminum Instrument Panel?
Posted: Thu Jan 31, 2019 10:04 pm
by Steve Simmons
Never seen one! Possibly one of the kit car companies made something?
Re: Aluminum Instrument Panel?
Posted: Fri Feb 01, 2019 12:12 pm
by Franz Tenbrock
Hallo
it should be easy to make one by yourself
2 years ago i have done a new door bell panel atmy door from stainless steel
i looked to the web and found a companie with a perfect tool to do it
cutworks
https://www.cutworks.com/shopSelection.html
there you can paint it and they will laser it for a good price.
so you only need the measerment
or you download freecad , draw it and upload the stl
Re: Aluminum Instrument Panel?
Posted: Sat Feb 02, 2019 5:15 pm
by Clifford Jay Lockrow
Yes! A good friend made one for his td in exactly the same shape as the original but was able to szqyeeze ib a few more items. I don't recall what they were. He made it out of about 3/16" aluminum and gave it an engine turn finish. It looked quite nice. He is gone but the car was TC 5050 if you could find it. It went to California.