MG T-ABC

Looking for a couple of cast iron TC water outlets. These are 72-degree elbows, not 62 degrees like TD. Contact me if you have any to sell!

Steve
I have a TC water outlet which someone had modified by brazing on a heater hose drain tap. The tap could be cut off and the hole brazed or welded closed. Would send a pic but don't know how.
Rick Wilson
TC1130

Thanks Rick, you can email it to me directly if you like. Email button is below my post.

Steve; nothing seems to happen when clicking email button below your post.
contact me at : warcdt@aol.com and I'll send you pic of water outlet.

Rick Wilson