Search found 1851 matches
- Sun May 05, 2024 7:28 am
- Forum: TABC Chat
- Topic: TC Forever More Tub Frame Modification and Tub Build
- Replies: 45
- Views: 9515
Re: TC Forever More Tub Frame Modification and Tub Build
Very nice work!
- Mon Apr 29, 2024 12:45 pm
- Forum: TABC Chat
- Topic: Trailering a TC
- Replies: 8
- Views: 2173
Re: Trailering a TC
There's a lip on the inside of the ramps so the car would have to bounce up several inches, and then over several inches, to fall off. So long as the straps are secure, there's no way. I've actually seen a TC towed on one of these trailers for an hour on the highway with no straps in the rear at all...
- Mon Apr 29, 2024 7:18 am
- Forum: TABC Chat
- Topic: Trailering a TC
- Replies: 8
- Views: 2173
Re: Trailering a TC
U-Haul are definitely tight. Here's a photo of the wheel straps. I put the rear straps around the rear axle towers.
- Sun Apr 28, 2024 4:38 pm
- Forum: TABC Chat
- Topic: Trailering a TC
- Replies: 8
- Views: 2173
Re: Trailering a TC
You can put the straps through the front wheels or around the axle. In the rear, the spring trunions work well. Others might have alternate ideas.
- Mon Apr 22, 2024 9:04 am
- Forum: TABC Chat
- Topic: carb balancing
- Replies: 11
- Views: 2706
Re: carb balancing
Yeah that's what I mean, the other tool I have reacts slowly, so if the airflow was erratic then it might not show up as well as on the Unisyn, which reacts very quickly.
- Mon Apr 22, 2024 6:23 am
- Forum: TABC Chat
- Topic: carb balancing
- Replies: 11
- Views: 2706
Re: carb balancing
Hmmm, not sure really but they do essentially the same thing just with a different reading. The snail type, or at least the one I have, has a bit of damping to it so the reading changes just a little slower than the Unisyn. That might be a disadvantage for the test you describe.
- Sun Apr 21, 2024 11:04 am
- Forum: TABC Chat
- Topic: Loss of spark
- Replies: 4
- Views: 1411
Re: Loss of spark
So you put back parts that were giving problems before and now they're working? First thought, I would never trust that a new coil or condenser is good. If you have a known good used spare, I would try that. You might want to test the resistance of the coil when cold, and then again when hot. If the...
- Sat Apr 20, 2024 8:13 pm
- Forum: TABC Chat
- Topic: carb balancing
- Replies: 11
- Views: 2706
Re: carb balancing
I haven't seen erratic readings because of the type of tool, but I've had some of them where the disc couldn't be adjusted properly, and I had a couple where the plastic tube cracked when it got old. The other type is easier to use and more accurate in my experience.
- Sat Apr 20, 2024 5:55 pm
- Forum: TABC Chat
- Topic: TC Front End Improvements-Handling
- Replies: 38
- Views: 8979
Re: TC Front End Improvements-Handling
Keep in mind that one downside (or design feature depending on how you look at it) of the original ends is that the toe decreases with speed. So setting the toe a bit aggressive can give the desired toe at higher speeds.
- Sat Apr 20, 2024 5:53 pm
- Forum: TABC Chat
- Topic: carb balancing
- Replies: 11
- Views: 2706
Re: carb balancing
I've found the Uni-Syn to be a little flaky / finicky sometimes. I prefer the "snail" type. It's very accurate and no adjustments are ever necessary. Mine is similar to the one below.
- Fri Apr 19, 2024 4:19 pm
- Forum: TABC Chat
- Topic: Best Timber Parts
- Replies: 21
- Views: 4423
Re: Best Timber Parts
Man, I'd rather have a totally blown engine and gearbox than one bad piece of wood! I agree buying a full tub is the best way to go unless you have the skills and patience to deal with building one yourself. And even then it's still tempting. The cost is certainly high, but for someone like me with ...
- Fri Apr 19, 2024 4:15 pm
- Forum: TABC Chat
- Topic: TC Forever More Tub Frame Modification and Tub Build
- Replies: 45
- Views: 9515
Re: TC Forever More Tub Frame Modification and Tub Build
The previous owner of my '67 MGB GT did something similar. The rear quarters weren't welded on right so there was a big difference between the quarter and the bottom rear of the door. He made up the difference with filler. Needless to say, that has been remedied. Cut, filler strip and re-weld both s...
- Thu Apr 18, 2024 9:37 am
- Forum: TABC Chat
- Topic: TC Forever More Tub Frame Modification and Tub Build
- Replies: 45
- Views: 9515
Re: TC Forever More Tub Frame Modification and Tub Build
Wow, that's thick!
- Thu Apr 18, 2024 9:36 am
- Forum: TABC Chat
- Topic: TC Front End Improvements-Handling
- Replies: 38
- Views: 8979
Re: TC Front End Improvements-Handling
Mark, Duncan covered it pretty well but I will add that while the TC steering will never be as stable or light as the TD, it should be be pretty good once it's been set up correctly. One thing that usually isn't set right is the centering. Don't set it at the center of play, set it at the center of ...
- Wed Apr 10, 2024 3:01 pm
- Forum: TABC Chat
- Topic: Best Timber Parts
- Replies: 21
- Views: 4423
Re: Best Timber Parts
I ordered my floorboards from Craig Seabrook / Whitworth Shop. They were spot on and high quality, at a reasonable price. If I were looking for other wood bits I would certainly consider ordering from him.
- Wed Apr 10, 2024 2:59 pm
- Forum: TABC Chat
- Topic: TC Badge Bar Color
- Replies: 2
- Views: 782
Re: TC Badge Bar Color
In addition to the above... aftermarket clamps are aluminum, so that's probably what one of your is.
- Tue Apr 09, 2024 9:17 am
- Forum: TABC Chat
- Topic: TC Steering Wheel Swap
- Replies: 10
- Views: 1797
Re: TC Steering Wheel Swap
If you can find an old steering shaft, you can use it as a broach.
- Tue Apr 09, 2024 8:42 am
- Forum: TABC Chat
- Topic: TC Steering Wheel Swap
- Replies: 10
- Views: 1797
Re: TC Steering Wheel Swap
I've seen more than one Brooklands hub where the splines were too tight and needed to be broached. These were new hubs, not originals.
- Tue Apr 09, 2024 8:41 am
- Forum: TABC Chat
- Topic: Regulator getting hot
- Replies: 10
- Views: 1989
- Mon Apr 08, 2024 9:26 am
- Forum: TABC Chat
- Topic: TC Front End Improvements-Handling
- Replies: 38
- Views: 8979
Re: TC Front End Improvements-Handling
I was thinking more of the Bridgestone, which are quite small and square but offer the advantage of a completely modern tire design. I would be very interested to compare the performance of the Bridgestone to the American Classic to see how they stack up. I'm betting the Bridgestone are noticably be...