MG TC TC1472 - up and running after 50 years

Post photos of your car here, plus any stories or photos you want to share!
Post Reply
User avatar
bloodysalmon
Posts: 123
Joined: Mon Jan 22, 2018 4:10 am
Location: Kirkby-in-Ashfield, Notts, UK

MG TC TC1472 - up and running after 50 years

Post by bloodysalmon » Wed Oct 30, 2019 5:23 am

My recently restored (only mechanics, not body) to an 'oily-rag' status ... not been on the road since mid-60's
TC1472 180122 (1).JPG
Chris Blood
TC1472,TC2686,TC4245,D-type D0407

User avatar
Steve Simmons
Site Admin
Posts: 1010
Joined: Wed Dec 26, 2012 10:48 am
Location: Southern California
Contact:

Re: MG TC TC1472 - up and running after 50 years

Post by Steve Simmons » Thu Oct 31, 2019 1:06 pm

I wouldn't cosmetically restore that car either. Just get it running and enjoy! :thumbs:
1949 TC8975 / XPAG 9609
1949 TC9849 EXU / XPAG 10507
http://www.mgnuts.com

User avatar
bloodysalmon
Posts: 123
Joined: Mon Jan 22, 2018 4:10 am
Location: Kirkby-in-Ashfield, Notts, UK

Re: MG TC TC1472 - up and running after 50 years

Post by bloodysalmon » Fri Nov 01, 2019 12:06 am

:thumbs: already have Steve, done 150 miles since September now ... weekly attention which gets better and better
Chris Blood
TC1472,TC2686,TC4245,D-type D0407

Bart Sanders
Posts: 8
Joined: Fri Oct 18, 2019 11:48 am
Location: The Netherlands
Contact:

Re: MG TC TC1472 - up and running after 50 years

Post by Bart Sanders » Fri Nov 22, 2019 8:48 am

Hello Chris,

Agree, keep it in this state as much as possible, Our TC8204 has been restored around 1995 in the USA according to the previous owner (Bob Mendelsohn). I'm inspecting it now. Found no cracks in the two axle stubs (dye & developer method). But, instead, the right axle has been renewed. The "crack" (a thin circel where the axle is pressed into the nuckle) showed this. Indeed, via the knuckleback and take away all the old grease, one sees the axle metal and its center hole.

It got a Datsun steering box, some other items were added like an oil cooler. Front brake system completely new. Steering rod bent, tierod straight. Front springs need replacement, appear to be the original sets.

But, I want to leave it as it is, looking to cosmetics. One does see, what we call, mild patina and that suits such an old driver fine.
TC8204 aka "Maegan"
TC8204 aka "Maegan"
Have found a front axle-beam thing however, see separate posting.

Groeten!

Bart

User avatar
bloodysalmon
Posts: 123
Joined: Mon Jan 22, 2018 4:10 am
Location: Kirkby-in-Ashfield, Notts, UK

Re: MG TC TC1472 - up and running after 50 years

Post by bloodysalmon » Mon Jun 08, 2020 12:50 pm

after 300+ miles its now settling in ...
Attachments
TC1472 200526 (2).JPG
TC1472 200526 (2).JPG (62.2 KiB) Viewed 338 times
Chris Blood
TC1472,TC2686,TC4245,D-type D0407

User avatar
Steve Simmons
Site Admin
Posts: 1010
Joined: Wed Dec 26, 2012 10:48 am
Location: Southern California
Contact:

Re: MG TC TC1472 - up and running after 50 years

Post by Steve Simmons » Mon Jun 08, 2020 12:57 pm

Not to take anything away from that lovely TC, but is that your D-Type in the background? Very nice!
1949 TC8975 / XPAG 9609
1949 TC9849 EXU / XPAG 10507
http://www.mgnuts.com

User avatar
bloodysalmon
Posts: 123
Joined: Mon Jan 22, 2018 4:10 am
Location: Kirkby-in-Ashfield, Notts, UK

Re: MG TC TC1472 - up and running after 50 years

Post by bloodysalmon » Mon Jun 08, 2020 11:02 pm

yes it is Steve, according to all records held its the only D-type Salonette surviving, 15 year restoration and 99% finished.
TC1472 200206 (8).JPG
TC1472 200206 (8).JPG (60.3 KiB) Viewed 328 times
Meanwhile, the photo's are upside after reducing memory ... but I couldnt seem to right it no matter what I do
Chris Blood
TC1472,TC2686,TC4245,D-type D0407

Post Reply