Moss QC

Discussion of TABC-related matters
Post Reply
User avatar
tomalger
Posts: 11
Joined: Fri Nov 10, 2023 12:58 pm
Location: Virginia usa

Moss QC

Post by tomalger » Mon Dec 11, 2023 12:24 pm

'49 TC
'was checking the pinion shims from Moss... 236-490
the two .010 shims measured* .007. ( *Starrett micrometer )
the .002 shim was .002 .
Top
User avatar
Steve Simmons
Site Admin
Posts: 2660
Joined: Wed Dec 26, 2012 10:48 am
Location: Southern California
Contact:
Contact Steve Simmons

Re: Moss QC

Post by Steve Simmons » Mon Dec 11, 2023 2:33 pm

I've run into that with hub shims many times, from different suppliers. It seems like an easy thing to get right for whoever manufactures them. I have to measure every shim to make sure it's what it says it is.
1949 TC8975 / XPAG 9609
1948 TC6011 / XPEG1182 (XPAG6472)
http://www.mgnuts.com
Top
User avatar
tomalger
Posts: 11
Joined: Fri Nov 10, 2023 12:58 pm
Location: Virginia usa

Re: Moss QC

Post by tomalger » Mon Dec 11, 2023 7:00 pm

maybe shims should be marked > .010 +/- (more or less)...
Top
User avatar
Duncan M
Posts: 799
Joined: Fri Oct 10, 2014 9:08 pm
Location: Northern California

Re: Moss QC

Post by Duncan M » Tue Dec 12, 2023 11:49 am

Got some of their steering box top plate shims several years back and they were not even made of metal. Those shims must be metal. I also got a new top plate at the same time (actually got 2) and it was very good quality with hard chrome applied on the (lightly crosshatched) working side.
Top
Post Reply

Return to “TABC Chat”