MG TA1932 in Germany - Blog - all problems and ...

Discussion of TABC-related matters
User avatar
Franz Tenbrock
Posts: 543
Joined: Wed Jul 11, 2018 9:39 am
Location: Waltrop Germany

Re: MG TA1932 in Germany - Blog - all problems and ...

Post by Franz Tenbrock » Sun Mar 17, 2024 8:16 am

a new toy needs my attention ;-)

I work in Dortmund and have no place to park, so I take a motorbike to get there
i have a BMW650CS, but when it rains i get all the rain
so I bought a BMW75RT, an old police motorbike
the last owner didn't clean it for 10 years,
the electric windscreen didn't work anymore the tyres were old and worn out
now the windshild runs as new the bike is cleaned and the wheels are off for new tires

and my TA runs perfect ready for the season

sold my 2 smart roadster coupe also yesterday,
so a realy good weekend
Attachments
Screenshot 2024-03-17 170654.jpg
Best Regards
Franz

3D Print: CJR3 case for Lucas340, individual Titan-X spark plug holder, resin printed octagon hazzard light switch and some more,

User avatar
Franz Tenbrock
Posts: 543
Joined: Wed Jul 11, 2018 9:39 am
Location: Waltrop Germany

Re: MG TA1932 in Germany - Blog - all problems and ...

Post by Franz Tenbrock » Sat Mar 30, 2024 12:58 pm

Hi
my BMW k75rt runs good now
sold two smart roadster coupes
my homeasssitant smart home works better and better
plants in the garden are cut
so some time to make other things

today my son wants to make some pictures with the MGs
so we took the cars out of the city for a littel photo shooting
Attachments
1.jpg
3.jpg
5.jpg
IMG_20240330_172731832.jpg
Best Regards
Franz

3D Print: CJR3 case for Lucas340, individual Titan-X spark plug holder, resin printed octagon hazzard light switch and some more,

User avatar
Franz Tenbrock
Posts: 543
Joined: Wed Jul 11, 2018 9:39 am
Location: Waltrop Germany

Re: MG TA1932 in Germany - Blog - all problems and ...

Post by Franz Tenbrock » Mon Apr 01, 2024 3:49 am

Shitty weather today
i took the hardtop off to do the last things
rear wood on wood so some noise when i drive on a bad road
i still had some black felt in the cellar which i have now stuck on with double sided tape
now it should be quiet

and just made a copy of all the sides i have written here, all the pictures
now in one word document, so if the side broke down i have my own secured document with all the pictures,
perhaps some day important
it is a 52 mb file :P
Attachments
IMG_20240401_123334177.jpg
IMG_20240401_123344196.jpg
IMG_20240401_123528045.jpg
Best Regards
Franz

3D Print: CJR3 case for Lucas340, individual Titan-X spark plug holder, resin printed octagon hazzard light switch and some more,

User avatar
Franz Tenbrock
Posts: 543
Joined: Wed Jul 11, 2018 9:39 am
Location: Waltrop Germany

Re: MG TA1932 in Germany - Blog - all problems and ...

Post by Franz Tenbrock » Sun Apr 21, 2024 9:39 am

first classic car weeekend this year for my cars
38. Highland Games in Einbeck
location
PS Speicher Einbeck
234 km with the trailer to reach the destination
raining the hole time
but when we reached Einbeck the rain stops slowly
we got a good home for the TA, all other cars outside
saturday we had about 160 km with our cars through a wonderful part of Germany
up and down right and left
about 120 km until lunch in Söhrer Forsthaus
https://www.einbeck-tourismus.de/tour/oldtimer-ausfahrt
the sun comes up
back to einbeck after a soup
the next 15 km was the best from the trip
my TY and Ya have been the eldest cars in the round
but both done it without a problem
back now after a wonderful weekend
on the way back we could see some snow at the top of the hills, funny
not seen so much snow this winter
Attachments
Screenshot 2024-04-21 192239.jpg
Screenshot 2024-04-21 192302.jpg
Screenshot 2024-04-21 192346.jpg
Screenshot 2024-04-21 192346.jpg (46.38 KiB) Viewed 37 times
20.jpg
Best Regards
Franz

3D Print: CJR3 case for Lucas340, individual Titan-X spark plug holder, resin printed octagon hazzard light switch and some more,

Post Reply