a new toy needs my attention ;-)
I work in Dortmund and have no place to park, so I take a motorbike to get there
i have a BMW650CS, but when it rains i get all the rain
so I bought a BMW75RT, an old police motorbike
the last owner didn't clean it for 10 years,
the electric windscreen didn't work anymore the tyres were old and worn out
now the windshild runs as new the bike is cleaned and the wheels are off for new tires
and my TA runs perfect ready for the season
sold my 2 smart roadster coupe also yesterday,
so a realy good weekend
MG TA1932 in Germany - Blog - all problems and ...
- Franz Tenbrock
- Posts: 546
- Joined: Wed Jul 11, 2018 9:39 am
- Location: Waltrop Germany
Re: MG TA1932 in Germany - Blog - all problems and ...
Best Regards
Franz
3D Print: CJR3 case for Lucas340, individual Titan-X spark plug holder, resin printed octagon hazzard light switch and some more,
Franz
3D Print: CJR3 case for Lucas340, individual Titan-X spark plug holder, resin printed octagon hazzard light switch and some more,
- Franz Tenbrock
- Posts: 546
- Joined: Wed Jul 11, 2018 9:39 am
- Location: Waltrop Germany
Re: MG TA1932 in Germany - Blog - all problems and ...
Hi
my BMW k75rt runs good now
sold two smart roadster coupes
my homeasssitant smart home works better and better
plants in the garden are cut
so some time to make other things
today my son wants to make some pictures with the MGs
so we took the cars out of the city for a littel photo shooting
my BMW k75rt runs good now
sold two smart roadster coupes
my homeasssitant smart home works better and better
plants in the garden are cut
so some time to make other things
today my son wants to make some pictures with the MGs
so we took the cars out of the city for a littel photo shooting
Best Regards
Franz
3D Print: CJR3 case for Lucas340, individual Titan-X spark plug holder, resin printed octagon hazzard light switch and some more,
Franz
3D Print: CJR3 case for Lucas340, individual Titan-X spark plug holder, resin printed octagon hazzard light switch and some more,
- Franz Tenbrock
- Posts: 546
- Joined: Wed Jul 11, 2018 9:39 am
- Location: Waltrop Germany
Re: MG TA1932 in Germany - Blog - all problems and ...
Shitty weather today
i took the hardtop off to do the last things
rear wood on wood so some noise when i drive on a bad road
i still had some black felt in the cellar which i have now stuck on with double sided tape
now it should be quiet
and just made a copy of all the sides i have written here, all the pictures
now in one word document, so if the side broke down i have my own secured document with all the pictures,
perhaps some day important
it is a 52 mb file
i took the hardtop off to do the last things
rear wood on wood so some noise when i drive on a bad road
i still had some black felt in the cellar which i have now stuck on with double sided tape
now it should be quiet
and just made a copy of all the sides i have written here, all the pictures
now in one word document, so if the side broke down i have my own secured document with all the pictures,
perhaps some day important
it is a 52 mb file
Best Regards
Franz
3D Print: CJR3 case for Lucas340, individual Titan-X spark plug holder, resin printed octagon hazzard light switch and some more,
Franz
3D Print: CJR3 case for Lucas340, individual Titan-X spark plug holder, resin printed octagon hazzard light switch and some more,
- Franz Tenbrock
- Posts: 546
- Joined: Wed Jul 11, 2018 9:39 am
- Location: Waltrop Germany
Re: MG TA1932 in Germany - Blog - all problems and ...
first classic car weeekend this year for my cars
38. Highland Games in Einbeck
location
PS Speicher Einbeck
234 km with the trailer to reach the destination
raining the hole time
but when we reached Einbeck the rain stops slowly
we got a good home for the TA, all other cars outside
saturday we had about 160 km with our cars through a wonderful part of Germany
up and down right and left
about 120 km until lunch in Söhrer Forsthaus
https://www.einbeck-tourismus.de/tour/oldtimer-ausfahrt
the sun comes up
back to einbeck after a soup
the next 15 km was the best from the trip
my TY and Ya have been the eldest cars in the round
but both done it without a problem
back now after a wonderful weekend
on the way back we could see some snow at the top of the hills, funny
not seen so much snow this winter
38. Highland Games in Einbeck
location
PS Speicher Einbeck
234 km with the trailer to reach the destination
raining the hole time
but when we reached Einbeck the rain stops slowly
we got a good home for the TA, all other cars outside
saturday we had about 160 km with our cars through a wonderful part of Germany
up and down right and left
about 120 km until lunch in Söhrer Forsthaus
https://www.einbeck-tourismus.de/tour/oldtimer-ausfahrt
the sun comes up
back to einbeck after a soup
the next 15 km was the best from the trip
my TY and Ya have been the eldest cars in the round
but both done it without a problem
back now after a wonderful weekend
on the way back we could see some snow at the top of the hills, funny
not seen so much snow this winter
Best Regards
Franz
3D Print: CJR3 case for Lucas340, individual Titan-X spark plug holder, resin printed octagon hazzard light switch and some more,
Franz
3D Print: CJR3 case for Lucas340, individual Titan-X spark plug holder, resin printed octagon hazzard light switch and some more,
- Franz Tenbrock
- Posts: 546
- Joined: Wed Jul 11, 2018 9:39 am
- Location: Waltrop Germany
Re: MG TA1932 in Germany - Blog - all problems and ...
some wonderful cars here in Zandvoort
it will be wonderful to see them on the road
tomorrow on the racing track
a good place for such cars
it will be wonderful to see them on the road
tomorrow on the racing track
a good place for such cars
Best Regards
Franz
3D Print: CJR3 case for Lucas340, individual Titan-X spark plug holder, resin printed octagon hazzard light switch and some more,
Franz
3D Print: CJR3 case for Lucas340, individual Titan-X spark plug holder, resin printed octagon hazzard light switch and some more,